What are the advantages of the twin screw fish feed machine?
Twin screw fish feed machine has been more and more recognized by the major manufacturers, more and more commercial production of double screw fish feed machine products, so what are the advantages of the machine in the end? Here is a brief introduction:
1. The adaptability of raw materials is wider, Twin screw fish feed machine needs a wider range of raw materials, can adapt to high viscosity, low viscosity, high oil, high moisture, viscous, oily, high humidity of raw materials and some other raw materials in the single screw production will slip processing.
2. Less restrictions on the granularity of raw materials, double screw fish feed machine can adapt to the production and processing of raw materials from micro powder to coarse powder particles and single screw extrusion machine processing range of unexpected granularity.
3. The material is more uniform in the barrel, which can increase steam and water, etc., and make the raw material mix more uniform, so that the product can achieve the desired effect.
4. The product structure is of better quality both internally and externally, which can achieve very good homogeneity. When the internal structure of the material changes, the structure is more uniform.
5. The ripening is more thorough, and the ripening is more uniform. Usually the starch ripening degree of the material under high temperature and high pressure of the twin-screw fish feed machine can reach more than 95%, so that the processed aquatic feed can remain stable in water and is not easy to foam, and the nutritional components of the product can be guaranteed to a greater extent without loss. The high degree of gelatinization makes it better digested and more easily absorbed.
6. More production. Good mixing performance makes the heat of the material more timely and uniform, speed up the ripening degree of the material, reduce the change of material temperature, improve the output of extruded food, so that the output of twin screw fish feed machine under the same power is higher.
7. Diversified products, wider adaptability. Twin screw fish feed machine can process small particles of aquatic feed and high fat formula, high moisture, high adhesion products and a variety of colors, sandwich type, special shape of the product.
8. The process operation is more convenient, the twin screw fish feed machine can adjust the screw speed according to the needs of the processing products, because the screw has the characteristics of self-cleaning function, it is very convenient to clean up, without disassembling the equipment can be cleaned up after each production.
9. Low replacement frequency of wearing parts. Many people think that the single screw extruder wear less wearing parts, in fact, in the process of double screw extrusion due to stable material conveying and material flow characteristics, decided that the material on the screw and barrel sleeve wear is smaller than the single screw, although one more screw, but the wearing parts of the replacement frequency is low, the cost will be low.
10. Lower production costs. Because double screw machine has good stability, operation in the process of feed processing on less waste, less waste water, fewer hours, high heat transfer efficiency, high yield, frequency conversion control more energy efficient, plus accessories cost is also low, double screw fish feed machine final production costs relative to the single screw extrusion machine is still lower.
As large size, large output, and the emergence of the special double screw type, use twin screw fish feed machine can obtain greater economic benefits, can more fully play extrusion processing technology has a wide range of raw materials, starch gelatinization degree is high, the water stability is much higher than ordinary pellet feed, product density can be adjusted, double screw fish feed machine machinable buoyancy aquatic feed, slow setting, fast and high moisture, high fat feed. So choose a suitable twin screw fish feed machine for the production of aquatic feed is the choice of many customers, Ji 'nan FLD Machinery Co., Ltd. welcome major customers to consult and order. Contact: Kevin, Tel :86-18660429170. Our company will wholeheartedly provide you with better prices and more reasonable product solutions.
Copyright 2024 © Jinan FLD Machinery CO.,LTD All Rights Reserved.
