The main features of the dog food extrusion machine:
1 .Double screw dog food extrusion equipment is mainly composed of feeding system, extrusion system, rotary cutting system, heating system, driving system, lubrication system and control system.
2. The feeding system, driving system and rotary cutting system of dog food extrusion equipment all adopt frequency conversion speed regulation with high power and stable operation..
3 Dog food extrusion equipment automatic lubrication, forced cooling, to ensure the safe operation of the extrusion press.
4 Dog food extrusion equipment for different raw materials, single screw, double screw feeding system, feeding uniform, stable, reliable.
5. The screw of dog food extrusion equipment is processed by special technology, which is wear-resistant, anti-fatigue and has a long service life.
6. The length-diameter ratio structure of different screw in dog food extrusion equipment can meet the requirements of different technology.
Dog food extrusion equipment maintenance and maintenance
1.The bearing of the dog food extrusion equipment box should be lubricated in time. After running for 500 hours, all grease should be replaced once. (Proper amount of grease should be added before running the new machine, and the lubricating oil should be changed after running for 200 hours
2.Other bearing parts of dog food extrusion equipment should be regularly filled with grease.
3.In the process of disassembly and assembly of dog food extrusion equipment, it is strictly prohibited to use weight screws, threaded sleeve and other vulnerable parts. Do not place heavy objects or supports on the extruder.
4.The extrusion equipment of dog food should be cleaned to prevent metal and other foreign matter from entering the machine and damaging the parts.
5.Dog food extrusion equipment feed extrusion machinery at any time to check the quality of the extrusion press, pay attention to the replacement of wearing parts.
Dog food extrusion equipment to keep the equipment clean.
1.When the dog food extrusion equipment is shut down for a long time and the extrusion materials are not used or replaced, the materials in the extrusion chamber should be cleaned to avoid agglomeration, mildew or cross contamination between materials.
2.Because the wearing parts close to the outlet wear out relatively quickly, and the wearing parts close to the end of the feeding outlet wear out less, so when replacing the wearing parts, it should be changed successively from the end of the outlet, and it is not suitable to replace multiple parts at one time.
Our company's dog food extrusion equipment is easy to operate and clean. The first cleaning can provide technical guidance, and the subsequent cleaning can also provide guidance.
Copyright 2024 © Jinan FLD Machinery CO.,LTD All Rights Reserved.
